Two Wests & Elliots Greenhouse Ventilation Products and Accessories
 |
ROOM - Thermostatic Extractor FanIncrease the ventilation in your greenhouse or conservatory by installing this powerful Thermostatically Controlled Extractor Fan to automatically remove the hot air from your greenhouse when it reaches the temperature you set on the thermostat. A window mounted unit with manual storm guard to prevent back draughts. Suitable for use in single glazed windows. Automatically controlled by a remote thermostat (6' / 183cm lead), it switches on & off at your chosen temperature. Two models available: Room Extractor Fan - includes a conventional Room Thermostat for use in conservatories which are used in a living area. Greenhouse Extractor Fan - includes a robust Greenhouse Thermostat which will withstand splashes of water & operate in greenhouses & conservatories where higher humidity levels prevail. Size: 8«" (21.5cm) diameter x 2 1/8" (54mm). Weight: 2« lbs (1.06kg). Wattage: 32 watts. Fan speed: 2000 r.p.m. Air changes: 400 cubic metres per hour e.g. air in a 12' x 8' conservatory is changed every 3« minutes. Buy ROOM - Thermostatic Extractor Fan |
 |
Air Blower (LEVANT FAN)This powerful electric Air Blower will enable good air circulation, useful both in Summer & Winter. Moves 400 cubic metres of air per hour. Only consumes 60 watts of power. Designed to be suspended using the three 11" (28cm) long zinc played chains supplied. Dimensions: 8«" (22cm) diameter, 10" (25cm) long. Complete with 5'5" (165cm) mains cable & 3 pin plug. Buy Air Blower (LEVANT FAN) |
 |
Air Circulation FanAir movement in the greenhouse is important all year round to reduce the risk of plant disease & damping-off, our 20 watt electrically operated Air Circulation Fan generates very gentle air movement needed to disperse stagnant air pockets without causing a draught. Manufactured by Two Wests & Elliott for over 18 years. The 4" (10cm) diameter blades move the air in a 12' x 8' greenhouse one and half times per hour. Dimensions: 5" (12cm) x 5" (12cm) X 5" (12cm) cube. Supplied complete with a fixing bracket & 12ft (366cm) of cable. Buy Air Circulation Fan |
 |
Louvre Kit (S00 324)Increase ventilation & air circulation in your greenhouse with this five bladed Louvre Kit designed to be fit in either an aluminium or wooden greenhouse. The kit consists of: Right Hand Fitment - with opening handle, Left Hand Fitment, Fixing Bolts - four bolts are included for fitting the kit to an aluminium greenhouse - these will need to be substituted for wood screws (not supplied) if the kit is to be fitted in a wooden greenhouse. Please Note: NO glass is included with the kit. Buy Louvre Kit (S00 324) |
 |
Automatic Louvre OpenerThis Automatic Louvre Opener can be fitted to our louvre kit & most other popular models. Operates on the same principle as the Bayliss openers - i.e. a stainless steel cylinder containing a mineral wax which expands with heat, causing the vent to open, as the temperature falls the wax contracts & the opener closes. Has a release catch to allow manual opening & closing. Buy Automatic Louvre Opener |
 |
Bayliss MK 7 Vent OpenerSuitable for use on nearly all greenhouses this Bayliss MK7 is an extremely reliable automatic vent opener operated by a stainless steel cylinder containing a mineral wax which expands with heat; this pushes a piston causing the vent to open. As the temperature falls the wax contracts & a strong stainless steel spring closes the opener. For roof vents weighing up to 26lbs, approx.30" x 30" (76cm x 76cm). Bolts on to aluminium greenhouses (fixings supplied) - for wooden greenhouses it is attached by wood screws (not supplied). Fitting neatly close to the glass the opener does not protrude into the greenhouse (so you don't bang your head!). Satin anodised aluminium unit approx. 11" (29cm) long which exerts a load of 13lbs (6Kg) i.e. it will lift a vent weighing up to 26lbs (12kg). Can be set to start opening the vent at any temperature between 12-25 Centigrade/55-75 Fahrenheit, giving a maximum window opening of 12" (30cm). Supplied complete with comprehensive installation instructions. Buy Bayliss MK 7 Vent Opener |
 |
Super Bayliss MK 7 Vent OpenerThis extremely reliable automatic vent opener Bayliss MK7 Super has been designed to lift very heavy double-glazed windows weighing up to 70 lbs. (32kg). For large roof vents weighing up to 70lbs. Bolts on to aluminium greenhouses (fixings supplied) - for wooden greenhouses it is attached by wood screws (not supplied). Fitting neatly close to the glass the opener does not protrude into the greenhouse (so you don't bang your head!). An aluminium unit approx. 15«" (39cm) long, white painted to compliment the modern conservatory. Exerts a load of 35lbs (16kg) i.e. it will lift a vent weighing up to 70lbs (32kg). Can be set to start opening the vent at any temperature between 16-25§ Centigrade/60-75§ Fahrenheit, giving a maximum window opening of 15" (38cm). Operated by a stainless steel cylinder containing a mineral wax which expands with heat, this pushes a piston causing the vent to open. As the temperature falls the wax contracts & a strong stainless steel spring closes the opener. Supplied complete with comprehensive installation instructions. Buy Super Bayliss MK 7 Vent Opener |
 |
Bayliss XL Vent OpenerThis Bayliss XL is an extremely reliable automatic vent opener operated by a stainless steel cylinder containing a mineral wax which expands with heat; this pushes a piston causing the vent to open. As the temperature falls the wax contracts & a strong stainless steel spring closes the opener. For roof vents weighing up to 22lbs, approx.30" x 24" (76cm x 61cm). Can be clamped onto aluminium greenhouses - no need for any drilling. If a more permanent fixing is required it can also be bolted on - for wooden greenhouses it is attached by wood screws (not supplied). Fitting neatly close to the glass the opener does not protrude into the greenhouse (so you don't bang your head!). Satin anodised unit approx. 11" (28cm) long which exerts a load of 11lbs (5Kg) i.e. it will lift a vent weighing up to 22lbs (10Kg). Can be set to start opening the vent at any temperature between 12-18§ Centigrade/55-65§ Fahrenheit, giving a maximum window opening of 12" (30cm). Supplied complete with comprehensive installation instructions. Buy Bayliss XL Vent Opener |
 |
Triple Spring Bayliss MK 7 Vent OpenerThis Bayliss MK7 Triple Spring is an extremely reliable automatic vent opener designed to be fitted to top hinged side windows or light roof vents to hold them firmly in place in windy conditions, with its extra springs to exerting more closing force. For side windows up to approx.36" x 24" (92cm x 61cm). Bolts on to aluminium greenhouses (fixings supplied) - for wooden greenhouses it is attached by wood screws (not supplied). Fits neatly close to the glass the opener does not protrude into the greenhouse. Satin anodised aluminium unit approx. 11«" (29cm) long which exerts a load of 13lbs (6kg) i.e. it will lift a vent weighing up to 26lbs (12kg). Can be set to start opening the vent at any temperature between 12-25§ Centigrade/55-75§ Fahrenheit, giving a maximum window opening of 12" (30cm). Operated by a stainless steel cylinder containing a mineral wax which expands with heat, this pushes a piston causing the vent to open. As the temperature falls the wax contracts & a strong stainless steel spring closes the opener. Supplied complete with comprehensive installation instructions. Buy Triple Spring Bayliss MK 7 Vent Opener |
 |
Thermostatic Extractor Fan GuardA safety guard to use with either our Room or Greenhouse Extractor Fan. Manufactured from robust galvanised mesh. Dimensions: 9" (19cm) x 7«" (22cm), 3" (7.5cm) deep. Supplied complete with four easy to fit sucker fixings to securely adhere the guard to glass. Buy Thermostatic Extractor Fan Guard |