Fruit Cages, Fruit Cage Netting and Accessories

Deluxe 6' High Fruit Cage 6' Wide 6' Long

Unobtrusive dark green, high quality, 6ft (183cm) High Deluxe Fruit Cages very strong but light enough to be moved from one site to another - increasing their usefulness throughout the year. Constructed from a tubular aluminium framework with a dark green, powder coated finish which gives a very smart, painted look which is not only extremely durable but also greatly enhances the overall appearance. Black U/V stabilised nylon joints are used to connect the framework, producing a Fruit Cage that will last for years. Kits based on 6ft (183cm) spans (i.e. an upright at every 6ft (183cm) within the fruit cage) which gives an extremely stable structure.

Each kit is supplied with everything you'll need to complete the fruit cage, as follows: 7ft (213cm) corner legs - rot proof ó" (19mm) diameter aluminium tubing which has a strong 1mm thick wall & a dark green, powder coated finish, supplied 7ft (213cm) long allowing 12" (30.5cm) to be sunk into the ground to provide firm anchorage. Each has a black ground spike at one end and a 3-way 90-degree joint at the top to form the corner of the cage. 6ft (183cm) horizontals - the same specification as the uprights, used to form the horizontals at the top of the cage. These should be connected to the joints at the top of the uprights using either a wooden or rubber mallet. Fruit cage netting - ó" (2cm) square mesh 2 metres wide, used to cover the sides & top of the fruit cage. Netting clips - to join the fruit cage netting to itself. Ground pegs - to anchor the bottom edge of the netting to the ground. Buy Deluxe 6' High Fruit Cage 6' Wide 6' Long

6' High Standard Fruit Cage 6' Wide 6' Long

These high quality, 6ft (183cm) High Standard Fruit Cages are constructed from a tubular aluminium framework which won't rust or rot connected by strong, black U/V stabilised nylon joints to give a cage that will last for years. The cages are very strong but light enough to be moved from one site to another - increasing their usefulness throughout the year.  Kits based on 6ft (183cm) spans (i.e. an upright at every 6ft (183cm) within the fruit cage) which gives an extremely stable structure.

Each kit is supplied with everything you'll need to complete the fruit cage, as follows: 7ft (213cm) corner legs - rot proof ó" (19mm) diameter aluminium tubing which has a strong 1mm thick wall, supplied 7ft (213cm) long allowing 12" (30.5cm) to be sunk into the ground to provide firm anchorage. Each has a black ground spike at one end & a 3-way 90-degree joint at the top to form the corner of the cage.  6ft (183cm) horizontals - the same specification as the legs, used to form the horizontals at the top of the cage. These should be connected to the joints at the top of the uprights using either a wooden or rubber mallet. Fruit cage netting - ó" (2cm) square mesh 6'6" (2 metres) wide, used to cover the sides & top of the fruit cage. Netting clips - to join the fruit cage netting to itself.  Ground pegs - to anchor the bottom edge of the netting to the ground. Buy 6' High Standard Fruit Cage 6' Wide 6' Long

Deluxe 3' High Fruit Cage 6' Wide 6' Long

High quality, 3ft (92cm) High Deluxe Fruit Cages ideal for protecting low crops such as strawberries. A tubular aluminium framework (which won't rust or rot) with a dark green, powder coated finish producing a very smart, painted look which is not only extremely durable but also greatly enhances the overall appearance. Black U/V stabilised nylon joints are used to connect the framework, producing a Fruit Cage that will last for years. Kits based on 6ft (183cm) spans (i.e. an upright at every 6ft (183cm) within the fruit cage) which gives an extremely stable structure. Each kit is supplied with everything you'll need to complete the fruit cage, as follows: 3'6" (99cm) corner legs - rot proof ó" (19mm) diameter aluminium tubing which has a strong 1mm thick wall & a dark green, powder coated finish, supplied 3'6" (99cm) long allowing 6" (15cm) to be sunk into the ground to provide firm anchorage. Each has a black ground spike at one end & a 3-way 90-degree joint at the top to form the corner of the cage. 6ft (183cm) horizontals - the same specification as the uprights, used to form the horizontals at the top of the cage. These should be connected to the joints at the top of the uprights using either a wooden or rubber mallet. Fruit cage netting - ó" (2cm) square mesh 2 metres wide, used to cover the sides & top of the fruit cage. Netting clips - to join the fruit cage netting to itself. Ground pegs - to anchor the bottom edge of the netting to the ground. Buy Deluxe 3' High Fruit Cage 6' Wide 6' Long

Deluxe Fruit Cage Door

This Deluxe Fruit Cage Door is an optional extra for our 6ft (183cm) high deluxe fruit cages. 3ft (92cm) wide x 6ft (183cm) high door. Made from a tubular aluminium framework with a dark green, powder coated finish, connected by strong, black U/V stabilised nylon joints. Can be fixed against any upright in the Fruit Cage. Buy Deluxe Fruit Cage Door

Aluminium Tube 6' Long Standard Mill Finish

Strong, long lasting, rot & rust proof Aluminium Tube ideal for making any shape & size of framework enabling you to design & build your own DIY fruit cage, cloche, cold frame etc. Rot proof aluminium tubing. ó" (19mm) diameter, with a strong 1mm thick wall. Easily cut to size with a hacksaw. Join lengths of tube by knocking the robust plastic joints (available to purchase separately) into the tube using a rubber or wooden mallet. Finishes available: Mill finish - plain aluminium tube. Deluxe green finish - a smart dark green, durable powder coating. Buy Aluminium Tube 6' Long Standard Mill Finish

Fruit Cage Netting Clips (Pack of 25)

Use these sturdy Netting clips to attach netting to itself or to supports by wrapping round & securing. 2" (5cm) long plastic clips. Supplied as a pack of 25.Buy Fruit Cage Netting Clips (Pack of 25)

Metre of Fruit Cage Netting (S4X2Metre)

As used in our fruit cages, this Fruit Cage Netting will prevent damage from birds & small animals. Black plastic netting. ó" (2cm) square mesh. Dimensions: 6'6" (2 metres) wide in multiple lengths of a metre. Sold per metre - order as many metres as required & cut to size.Buy Required Metres of Fruit Cage Netting (S4X2Metre)

Metre of Pigeon Netting (6"mesh/whitex2.04m wide)

In snowy weather fruit cage netting should be either removed or replaced by larger span Pigeon Netting to allow snow to fall through - wet snow is very heavy! White polypropylene netting. 6" (15cm) square mesh. Dimensions: 6'6" (2 metres) wide in multiple lengths of a metre. Sold per metre - order as many metres as required & cut to size. Buy Required Metres of Pigeon Netting (6"mesh/whitex2.04m wide)

Fruit Cage Ground Pegs (10 Pack)

Use these substantial Ground Pegs to hold a range of materials, such as netting, fleece, polythene etc. firmly onto the ground. 6" (15cm) long barbed plastic pegs. Designed to be pushed into the ground. Supplied as a pack of 10. Buy Fruit Cage Ground Pegs (10 Pack)

End Cap to Cover Aluminium Tube in Fruit Cages

A strong, black UV stabilised nylon End Cap, as used in our Fruit Cages. Use to cover the end/top of our ó" (19mm) diameter aluminium tubing. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy End Cap

Ground Spikes

A strong, black UV stabilised nylon Ground Spike, as used in our Fruit Cages. When fitted to the end of our ó" (19mm) diameter aluminium tubing this Ground Spike will stop soil from entering the tube & make it easier to push the tubing into the ground. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy Ground Spikes

Tube Clip (81 10 11)

A strong, black UV stabilised nylon Clip, as used with our ó" (19mm) diameter aluminium tubing. Push this clip around our aluminium tubing to hold netting, plastic, polythene etc. in place. Tube Clip (81 10 11)

3 Way 90* Joint

Use this robust 3 Way 90§ Joint to form a sturdy corner in your own DIY fruit cage, cloche, cold frame etc. by combining with our high quality aluminium tubing. Use this joint to create 'corners' in a framework by fitting three lengths of aluminium tube into the joint, one to be an upright & the remaining two forming horizontals at the top of the frame. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 3 Way 90* Joint

4 Way 90* Joint

Create large DIY fruit cages, vegetable cages etc by combining this robust 4 Way 90§ Joint with our strong aluminium tubing. With four spigots to accept aluminium tubing use to create large frameworks by fitting one length of tube as an upright & three lengths of tube as horizontals. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 4 Way 90* Joint

5 Way 90* Joint | Two Wests

Use this strong 5 Way 90§ Joint with our sturdy aluminium tubing to design & build large DIY fruit cages, vegetable cages etc. With five spigots to accept aluminium tubing this joint can be used in the middle of frameworks by fitting one length of tube as an upright & four lengths of tube as horizontals. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 5 Way 90* Joint

6 Way 90* Joint

For complex DIY fruit cages, plant supports, cold frames etc this sturdy 6 Way 90§ Joint will hold six lengths of our quality aluminium tube in place. With six spigots this joint enables you to join six lengths of aluminium tube at one point. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 6 Way 90* Joint

3 Way 120* Joint

Use this strong 3 Way 120§ Joint to design & build your own DIY cloches, cold frames etc. With three spigots this joint is ideal when constructing 'barn' shaped cloches or cold frames by fitting lengths on aluminium tube onto each spigot. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 3 Way 120* Joint

4 Way 120* Joint

Create large DIY cloches, cold frames etc. using this robust 4 Way 120§ Joint with lengths of aluminium tubing. With four spigots this joint will retain four lengths of aluminium tube securely when forming large frameworks for 'barn' shaped cloches, cold frames etc. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 4 Way 120* Joint

2 Way 90* Flat Joint

Create strong plant supports to your own design by combining this robust 2 Way 90§ Joint with our quality aluminium tubing. Use this joint to form a corner within a plant support by fitting lengths of aluminium tube to the two spigots of the joint. Manufactured from strong, black UV stabilised nylon. Designed to fit tightly, knock into place using a rubber or wooden mallet. Buy 2 Way 90* Flat Joint