10M Long - Water Butt Drip Kit | Two Wests
For easy installation of an automatic plant watering system where mains water is not accessible (e.g. allotments) these Water Butt Drip System Kits are the ideal solution.
A versatile system allowing you to use very low water pressure to water your flowers or vegetables.
For the system to work ensure the water butt is a minimum of 12" (30cm) above the plants to be watered.
These kits enable you to design & create you own water system by use of straight connectors, 'T' connectors & end plugs. Each kit includes:
7mm Pipe - this forms the main artery of the system & has pre-inserted drippers every 12" (30cm) along its length.
«" (13mm) to 7mm Reducer - 3" (75mm) long barbed fitting to securely join «" (13mm) hose to 7mm pipe.
7mm Straight Connectors - 1«" (40mm) long, barbed at both sides to ensure a tight, secure joint between both pieces of pipe.
7mm 'T' Connector - barbed fitting approx. ó" (20mm) long in all three directions, use to branch the pipe.
7mm Plugs - «" (15mm) barbed plug to securely fit into the end of 7mm pipe to end a run.
Two kits available:
10 Metre Kit - contains 10m Pipe, one Reducer, two Straight Connectors, one 'T' Connector & two Plugs.
30 Metre Kit - contains 30m Pipe, three Reducers, three Straight Connectors, three 7mm 'T' Connector, three «" 'T' Connectors & six 7mm Plugs.
10M Long - Water Butt Drip Kit
Please note: we recommend that you install a «" filter between your water butt & 7mm pipe to prevent the pipe becoming blocked due to debris in the rain water.
This Water Butt Drip System is designed to enable you to run up to a total of 100m of the 7mm pipe from your water butt, providing this length is divided into separate runs of no more than 30 metres.