10' Wide Polythene Tunnel 10' Long | Two Wests
From 10' up to 40' long tunnels, these 10' Wide Poly Tunnel Greenhouses use the same high quality
features of commercial sized tunnels used by professional growers scaled down to make them ideal for gardens & allotments.
Dimensions - 10' (3.05m) wide, 7'6" (2.28m) high in middle of structure, 3' (0.91m) straight sides - for increased growing space. Available in a range of lengths from 10' (3.05m) up to 40' (12.19m) long.
Hoops - spaced every 5' (1.52m), made from 1" (25mm) O.D. galvanised steel with 1.5mm wall, heavily galvanised inside & out to prevent corrosion. Made in two sections with a central swaged joint for easy assembly & to prevent twisting.
Ground Tubes - strong, heavily galvanised tubes to give firm anchorage. Also used for levelling the structure & tensioning the polythene cover.
Cover - high quality UV stabilised 720 gauge polythene, with light transmittance of approx. 90%. Stretched over the hoops of the tunnel & anchored down by burying in a trench dug around the tunnel. |Anti-Hot Spot Tape - long lasting, self-adhesive foam tape to apply to the hoops before covering. Provides an insulating layer between the steel & polythene preventing hot spots, which cause the cover to stretch & weaken. Helps prolong cover life by approx. 1 year.
Doors - 3' (0.91m) wide by 6' high single hinged timber doors at both ends - allow easy access & ventilation. Made from tanalised timber, ideal for water/ground contact providing protection against fungal & insect attack.
10' Wide Polythene Tunnel 10' Long
<a href="/twowestssite/cm/POLYTUNNEL.htm">Click here</a> to see full details of delivery times & charges.
Illustration shows a 10' Wide by 15' long Poly Tunnel.
A poly tunnel greenhouse doesn't need any foundations, it's installed by digging & clearing a suitable site & sinking the framework into the ground. A cover is placed over the resulting hoops & anchored down by burying it in a trench dug around the greenhouse.