Automatic Water Reservoir | Two Wests
Reliable, constant watering can be achieved on benches or shelves by installing an Automatic Water Reservoir.
Contents:
A Plastic Tank - 4ó" (12cm) x 6«" (16.5cm) x 5" (13cm) deep, 1.4 Litre (2« pt) capacity.
Torbeck Control Value - to enable automatic filling. Starts & stops the water flow maintaining a constant level of water in the reservoir.
Fittings - to allow connection to a " hose (use for mains or water butt supply) or to " tube (use for Overhead Tanks or Bags).
Anti Tip Brackets - complete with cropped bolts & nuts.
Aluminium Lid - to reduce evaporation & prevent algae growth.
Capillary Wick - to draw water from the reservoir onto capillary matting.
Water can be supplied to the reservoir from the mains, a water butt, an overhead tank or 2 gallon bag.
When using a reservoir to supply water to matting on a staging more than 10ft (305cm) long, mount in a central position.
The water supply should not be above the area to be watered otherwise flooding will occur - ideally it should be level or no more than 4" (10cm) below the watering area.