2.25 KW Bio Nevada Greenhouse Fan Heater | Two Wests
High quality 2.25KW & 3KW Bio Nevada electric fan heaters developed by Bio Green to provide energy efficient heating & air circulation within greenhouse environments.
Suitable for use in damp atmospheres these stainless steel cased heaters have been fully approved & independently tested to IPX4 spray & waterproof standards.
Designed to be wall mounted, air vents at the top enable the internal fan to recycle the hot air at the top of the greenhouse, heat it to the set temperature & expel it at the base of the unit through the perforated Aluflex tube which extends from 2ft (61cm) up to 8'2" (249cm).
The powerful internal fan moves 415 cubic metres of air per hour to provide even heat distribution & air circulation.
A sheathed heating element is easily & accurately controlled by a thermostat with temperature range of 0*-26*C (32*-78*F).
For efficient use in larger greenhouses a 19'8" (590cm) UV stabilised PVC perforated tube is supplied to extend the air tube.
3 Year manufacturers guarantee.
Dimensions: 18" (46cm) high x 14" (36cm) wide x 4" (10cm) deep.
Models available: 2.25KW to heat 8' x 10' greenhouses, 3KW to heat 10' x 12' greenhouses.
Use these heaters efficiently in both the winter & summer. For winter use set the fan to run continuously or to turn off completely when the set temperature is reached. In the summer set on fan only to circulate the air or set the air tube through a window to expel the hot air from the greenhouse. Using the fan only setting the 60 watt motor is very economical to run.