2 KW Bio Arizona Greenhouse Fan Heater | Two Wests
These superior, stainless steel cased Bio Arizona electric fan heaters by Bio Green have been designed to be suspended from the roof of a greenhouse or polythene tunnel & use a remote electronic thermostat for accurate temperature sensing.
Ideal for greenhouses where space is at a premium the heaters are supplied with strong 23" (58cm) long chains to enable them to be fastened at any position along the ridge of the greenhouse, keeping it clear of any shelving or staging.
Accurate temperature control is achieved with a remote electrical thermostat with a temperature range of 0*-40* C (32*-104* F).
A powerful internal fan uses just 29 watts of power to circulate 460 cubic metres of air per hour. Set to run continuously whilst the heating element switches on & off, or to turn on & off with the heat.
In the summer use the thermostat to control the fan only to provide air movement to aid cooling.
3 Year manufacturers guarantee.
Dimensions: 16«" (42cm) long x 9" (23cm) diameter.
Models available: 2KW to heat 8' x 10' greenhouses, 2.8KW to heat 10' x 12' greenhouses.
When installing the heater, for accurate temperature sensing fix the thermostat at the most appropriate place in the greenhouse. Attaching the thermostat to the heater with the 7'6" long cable, then to the mains with the 6'6" long cable. Temperature is sensed using an encapsulated thermistor on the end of a 3'3" flexible lead. Use the control knob to set your required temperature and the digital read out will confirm your setting.