Halls Supreme Greenhouse Base 6' 4" W 4' 4" L Plain (SO1695) | Two Wests
Provide a stable & secure foundation to your Halls greenhouse with this galvanised steel 6'4" (1928mm) wide Supreme Base.
In order for the greenhouse door to run freely you will need to fit your Halls greenhouse onto a base of some type.
This pre-fabricated galvanised steel base is easy to install & provides a strong foundation for the greenhouse.
Available in plain or green powder coated finish.
Dimensions: 6'4" (1928mm) wide, 5" (127mm) high & available in three lengths 4'4" (1326mm), 6'4" (1948mm) or 8'5" (2568mm). Select the correct length to suit your greenhouse.
Halls Supreme G/house Base 6' 4" W 4' 4" L Plain (SO1695)
Please note: this base is ONLY suitable for a Halls 6'4" (1930mm) wide Supreme greenhouse & can only be purchased at the same time as a greenhouse.
<a href="/twowestssite/cm/HSB.htm">Click here</a> for advise & information on siting your greenhouse.
If you don't want to purchase a pre-fabricated base for your greenhouse you can build a brick base or use a small hardwood batten. A minimum height of 1" (2.5cm) will be needed to allow free-running of the sliding door.
Whichever type of base you choose to use - be it factory made or built by yourself - it is essential to prepare a flat, level surface prior to erecting your greenhouse.