Base for Elite Windsor Lean To 6'6" Long Plain | Two Wests
Easily fit your Elite Windsor Lean-To directly to any level surface with this sturdy, aluminium, factory made Windsor Base.
An Elite Windsor Lean-To requires a base of some type - aluminium, timber or brick - to allow the door to slide in the overhanging bottom track.
This factory made aluminium base is the quickest & easiest way to provide a base.
Available in plain aluminium or with a powder coated finish - white, green or brown.
5" (125mm) high the base bolts directly to the bottom of the lean-to.
To secure to a level surface the base is supplied with four ? corner brackets. These can be sunk directly into the ground or cut into smaller brackets & used around the base to secure to concrete slabs, paving slabs etc.
Supplied complete with comprehensive instructions.
Please note: ONLY suitable for use with an Elite Windsor Lean-To. This base can ONLY be purchased at the same time as the lean-to.
Select the correct length to suit your lean-to.
Base for Elite Windsor Lean To 6'6" Long Plain
<a href="/twowestssite/cm/EWRB.htm">Click here</a> to see details on siting your Windsor Lean-to using an aluminium, timber or brick base.
Illustration shows an aluminium base, plain finish.